Specifications
Receiver
Channels: Dual Channel Available
Frequencies: 96, A & B group
Oscillator Type: PLL synthesizer
Audio Output Connector: 1/8" (3.5 mm) jack
Antenna: 1/4 wave wired
Audio Output Level: -60 dBV
Headphone Output Level: 30 mW
Receiving Frequency: 514 to 596 MHz
Receiving Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Frequency Response: 40 Hz to 18 kHz (¡À3 dB)
Batteries: Two AA size batteries
Dimensions: 6.7 x 2.5 x 1.2"
Weight Approx.: 7.72 oz excluding batteries
Transmitter
Channels: 96, A & B group
Audio Carrier Frequencies: 514 to 596 MHz
Reference Deviation: ¡À5 kHz
Voice Delay: 12 ms
Antenna: 1/4 wave wired
Audio Input Connectors: 1/8" (3.5 mm) jack
Battery: 2 x AA size batteries
Supported Device
DSLR camera with a 3.5mm microphone input or camcorder with XLR microphone inputs
IPhone by a SR-PMC1 iPhone cable
Warm Tips:
?Unable to connect the transmitter?
Please check the menu on the RX9 "Group B setting" to see if the Group B is turned on.
The default setting of Group B is turned OFF. So pls make sure you turn on the group B before you use two transmitters. On the other transmitter, please turn it to Gourp B frequency group
?The lav mic is muddy to connect my sound equipment?
The sound won't be pleasure if you directly connect the lav mic with the stereo. Please connect the RX9 receiver with a mixer, and then output it the stereo through the mixer.